Видео

+$1000 easy

Do you recommend lapping the upper receiver?

NARCO#/#****

Thanks to your video I lost fear of clearing my AR , really good explanation and timing, you got a new subscriber

For q tips, look into the brand "glob mops"

I cleaned my ar. I followed your instructions to the t. However now the bolt carrier group won't cycle or close at all when a magazine is inserted. I didn't have this issue before I cleaned I fear I may have messed something up. any tips or things I can check? I disassembled again and reassembled to make sure I did it right.

Which one is better for duty purposes? And why?

They need a manual safety module for the 320. Sig doesn't make one in aluminum either.

Years ago there was a small gun company called alpha. I think Remington bought the company and put their name on it. This is why they have only one model.

This is nice!

*there is no point in putting oil where he did. Put oil on contact points only*

is teeth size in receivers are same?

Yes i fed up

@midwestgunworks you said "aluminum" when putting the Titanium suppressor in the ultra sonic cleaner. When you mentioned using simple green ourple solution because it (the chemicals) doesn't harm aluminum... putting aluminum in an ultra sonic cleaner is a no no though. It can cause pitting and can eat away at the aluminum. For a safe rule of thumb, aluminum should not go in an ultra sonic cleaner.

I live in scandinavia. we're strict on gun laws. However the gun community is so captivating.

Highly informative

I have an old 700 PSS.. If I were to buy a new one , I'd buy Bergara.... they are better built than the new m700s and less damage to the pocket.

You need to work on camera placement.

This is the dumbest video I’ve ever seen

If I flip flopped the locked and unlocked price of the handgaurd is that an issue?

I was going to order one of these and then I realised that I only ever use the bolt handle once on a days shooting, the very first time I load it! Afterwards the gun automatically opens when empty, so its just a bit of bling really.

as seen in other videos, close-ups would be helpful when pointing to any item in the BCG

You lost me the second you said “ no live ammo on your bench “…

Two thoughts then a comment about the product. Folks say to pricey. Not knowing what you shoot, how much did you pay for your firearm? For those that are happy with something else, don't switch. Now, I have been using Gun Butter for almost 10 years and it works great. I happen to own 3 Glocks and one 1911. I use the oil on the Glocks where Glock says to oil it (a little dab will do you) and a pen oiler or the bottle will last me for almost two years. I use one dab of the grease on the trigger bar. On the 1911 I use the grease for the rails. Again, that is just what I use and it has done well for me. Life is short, to each his own.

I just can't get over the fact that the striker fired seems easier to just discharge. if the trigger snags boom. for a da/sa, the da trigger is harder to pull AND you can thumb the hammer to keep it from cocking. also many da/sa have a safety on top of that.. so you can carry da safety on and there is just no way that is going off even with a snagged trigger. So while you can say '3 safeties on a glock style striker fired' it is still just 1 action from outside. the trigger moves. it moves easier than a da.. and you can't block the striker with your finger when you draw from a holster.

I’m having trouble inserting the powder pin back into the bolt. What’s wrong?

Very nice job, thank you.

Cara pesan nya bagai mana boss

I watched the entire video,,,, and I did not see anything I like, I hunt I don't need a fluted threaded barrel,,, I like wood as far as I am concerned that $700 dollar stock is junk, there was nothing wrong with the trigger on the early 700s ,,the older 700s were not a rust bucket ,, I would never spend $1700 only to find out a $400 rifle was just as good as this new one

Any suggestions for pistol length buffer tube system?

Looks like a bergara

CAT M4 Tool is the way to go when cleaning that bolt tail. Makes scraping the carbon off way easier.

Very cool the Midwest industries rail has to come off

Very informative video. Does the Wilson Combat WCP365 fit the SIG p365 .380?

Hammer is superior period! I hate when they say their are pros and cons thats BULLSHIT their are no cons with a 1911 hammer gun its just a good adjustable trigger, crisp, fast reset, light pull plenty of safeties etc etc. As for carry or defense both systems will work for fast competitive u know the answer.

Bro installed the trigger spring upside down.. uh oh

I would have thought you would have spent some time on the Reticle in a scope review...

Question: Is it possible for ANY company to make a 10/22 Chassis that's NOT UGLY?????? No seriously.

Great video

with a name like that it sounds more like smoke and mirrors junk.

I like using toothpicks to clean crev

I like the AR-15 cause it reminds me of an airplane

thank you

Bergara is kicking Remington's butt. They improved and surpassed the R700 years ago. I like R700s, but they have to upgrade their equipment and figure out how to compete without costing 2x the competitors price.

Hey midwest gun works, who makes your charging handle?

Those actions are almost as smooth as Tikka or Sako factory actions

This video vomits some important things. No mention of any type of molybdemum grease on the receiver extension threads. No loc-title on the bolt release set screw... These are the details that make or break a build.

I have a Rossi triple black lever action .357 magnum with a threaded barrel. What suppressor would work best and would I need an adapter. I’m a very experienced shooter with very little suppressor knowledge! Thanks

Looks like a gun who main characters would use

Can you use WD - 40 .Asking for a friend ..?